|
|
| Modified Sine Wave Power Inverter (1,200W) |
| |
 |
Test conditions:
1) Operating temperature: 23°C±2°C
2) Operating relative humidity: 40-90% RH
3) Input: DC 12.5V
Specifications (based on test conditions above):
1) Max. continuous output power:
1,200W
2) Surge capability peak output power: 2,400W
3) DC input static current (no load): ≤0.8AMP
4) DC input over load current: ≤120-140AMP
5) AC output wave form: modified sine wave
6) Normal input voltage range: 11-15V
7) High voltage cut off level: >15V
8) Low voltage alarm: 10.5V±0.5V
9) Low voltage cut off level: 10.2V±0.5V
10) Output AC voltage (at DC 11-15V input): AC 115/230V±10% RMS
11) Output frequency level: 50±3Hz
12) Overload power range: 1,200W, 5-30%
13) Hi-pot test: PRI/sec, 3,500V/AC 5MA/3s
14) Temperature protection: <65°C
15) Full load max. optimum efficiency: ≥80%
16) AC output short circuit protection: system shut down (no damage)
17) Fan run: inner temperature rising up is ≥45°C
18) Fault warning: alarm beep
19) LED indicator:
a) Normal: green
b) Fault: red green
20) Fuse (spade type): 25A x 16pcs
21) Dimensions (L x W x H): 263 x 214 x 80mm
22) Environmental condition:
a) Operating temperature: 0-40°C
b) Operating relative humidity: 10-90% RH
c) Storage temperature: -10-50°C
d) Storage relative humidity: 10-95% RH |
|
chinapower.com
